![]() ![]()
This should give you a "USB Serial Port (COM x)" listing with Driver Date of (on my machine it shows as "USB Serial Port (COM 38)" but now I am able to connect using Tera Term and see terminal output.Ĩ) At this point, when you connect and disconnect the ZedBoard USB-UART the device should enumerate correctly. #Ft232r usb uart driver windows 10 update#This should give you a new "USB to UART Adapter" listing with Driver Date of and the "Virtual Serial Port Device 00" will come back.ħ) Now update the driver for the "Virtual Serial Port Device 00" device and browse to the same Cypress driver files that were installed from Step 2 above.On my machine, these files were located in the following folder: On my machine, these files were located in the following folder:Ĭ:Program Files (x86)CypressCypress USB-Serial DriverDriverBinar圜DC_Driverbinwin7x86 The device should come up again as "Cypress-0123456" and now you can update the driver and browse to the Cypress driver files that were installed from Step 2 above. I know it sounds rather strange but this is the only way I could get this to work.Ħ) With networks disabled, disconnect ZedBoard USB-UART and reconnect. In order to prevent it from being reinstalled, you must disable your wired and wireless networks before completing the next steps. If prompted, check the box for the "Delete the driver software for this device" option.ĥ) Now the Windows Update driver for the Cypress device has been removed. ![]() If prompted, check the box for the "Delete the driver software for this device" option.Ĥ) With your ZedBoard USB-UART still connected, next right click on the "USB to UART Adapter" device under the "Universal Serial Bus controllers" branch and select the Uninstall option. #Ft232r usb uart driver windows 10 install#I kept trying things like uninstalling the driver and reconnecting the device but the driver kept being assigned to the USB-UART.ġ) Download the "Microsoft Certified USB UART Driver Last Update: " listed on the Cypress CY7C64225 page:Ģ) Install the driver by running the CypressDriverInstaller_0.exe downloaded from the Cypress website.ģ) With your ZedBoard USB-UART connected, first right click on the "Virtual Serial Port Device 00" device in device manager and select the Uninstall option. I noticed that the driver that was loaded had a Driver Date of which is fairly new and must come from Windows Update when new hardware is connected to the system. I tried loading the old driver, but Windows kept saying that the current driver is up to date. I tried updating the driver but that did not seem to help. Upon inspection in the Device Manager, I saw the same "Virtual Serial Port Device 00" shown. I heard a few da-ding chimes as new devices were recognized but finally a da-dah error chime as the device was not recognized. There was a long pause while Windows 7 searched for the appropriate driver. Any suggestion on a solution would be greatly appreciated.I ran into this problem last week when I plugged a ZedBoard into my PC which I have never connected to before. The only thing that I know of that's changed since I was successful early this year are the numerous Win 7 upgrades. #Ft232r usb uart driver windows 10 drivers#When I run the FTDI executable installation file it runs and I get two green check marks and a "Ready to use" status but still nothing works and the Hardware Manager still says that the drivers are not installed (Code 28). I've downloaded the latest VCP drivers from FTDI to no avail. When I try to update the driver I get a message saying that Windows can't find the driver for this device. Device Manager shows the FT232R USB UART device under the heading of Other Devices but the properties for this device says the drivers aren't installed. When I connect it, it tries to load the driver(s) but I get an error window saying "Device driver software was not successfully installed". Now I'm unable to communicate with the Nano. I successfully installed Arduino SW and developed sketches which I was able to load and execute early this year. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |